Behavior of MORB magmas at uppermost mantle beneath a fast-spreading axis: an example from Wadi Fizh of the northern Oman ophiolite     

Norikatsu Akizawa  Shoji Arai  Akihiro Tamura 《Contributions to Mineralogy and Petrology》2012,164(4):601-625

  相似文献   

A search for an industrial cluster in Japanese manufacturing sector: evidence from a location survey   总被引：1，自引：0，他引：1  

Kazuo Kadokawa 《GeoJournal》2013,78(1):85-101

This paper explores the result of a questionnaire survey on the location decision of new manufacturing plants from 1997 to 2004 and discovers an industrial cluster in Japan. More specifically, performing an exploratory factor analysis across 22 manufacturing industries, this study firstly summarizes agglomeration advantages as a latent location factor, secondly specifies the regional share of industries that emphasize the agglomeration factor, and thirdly identifies the location of industrial cluster based on the regional share. The major finding is that there exists such agglomeration factor, by which most Marshallian location advantages are represented, and the main industrial cluster consists of high-tech industries and spread over the suburb area between Tokyo and Aichi prefectures, where are most manufacturing capacity is concentrated.  相似文献   

Cohesive zone length of metagabbro at supershear rupture velocity     

Eiichi Fukuyama  Shiqing Xu  Futoshi Yamashita  Kazuo Mizoguchi 《Journal of Seismology》2016,20(4):1207-1215

We investigated the shear strain field ahead of a supershear rupture. The strain array data along the sliding fault surfaces were obtained during the large-scale biaxial friction experiments at the National Research Institute for Earth Science and Disaster Resilience. These friction experiments were done using a pair of meter-scale metagabbro rock specimens whose simulated fault area was 1.5 m?×?0.1 m. A 2.6-MPa normal stress was applied with loading velocity of 0.1 mm/s. Near-fault strain was measured by 32 two-component semiconductor strain gauges installed at an interval of 50 mm and 10 mm off the fault and recorded at an interval of 1 MHz. Many stick-slip events were observed in the experiments. We chose ten unilateral rupture events that propagated with supershear rupture velocity without preceding foreshocks. Focusing on the rupture front, stress concentration was observed and sharp stress drop occurred immediately inside the ruptured area. The temporal variation of strain array data is converted to the spatial variation of strain assuming a constant rupture velocity. We picked up the peak strain and zero-crossing strain locations to measure the cohesive zone length. By compiling the stick-slip event data, the cohesive zone length is about 50 mm although it scattered among the events. We could not see any systematic variation at the location but some dependence on the rupture velocity. The cohesive zone length decreases as the rupture velocity increases, especially larger than \( \sqrt{2} \) times the shear wave velocity. This feature is consistent with the theoretical prediction.  相似文献   

Deserpentinization and high-pressure(eclogite-facies) metamorphic features in the Eoarchean ultramafic body from Isua,Greenland     

Juan Miguel Guotana  Tomoaki Morishita  Ikuya Nishio  Akihiro Tamura  Tomoyuki Mizukami  Kenichiro Tani  Yumiko Harigane  Kristoffer Szilas  D.Graham Pearson 《地学前缘(英文版)》2022,(1):297-309

Discontinuous chains of ultramafic rock bodies form part of the 3800–3700 Ma Isua Supracrustal Belt(ISB),hosted in the Itsaq Gneiss Complex of southwestern Greenland.These bodies are among the world’s oldest outcrops of ultramafic rocks and hence an invaluable geologic record.Ultramafic rocks from Lens B in the northwestern limb of ISB show characteristics of several stages of serpentinization and deserpentinization forming prograde and retrograde mineral assemblages.Ti-rich humite-group minerals such as titanian chondrodite(Ti-Chn)and titanian clinohumite(Ti-Chu)often occur as accessory phases in the metamorphosed ultramafic rocks.The Ti-rich humite minerals are associated with metamorphic olivine.The host olivine is highly forsteritic(Fo96-98)with variable Mn O and Ni O contents.The concentrations of the rare-earth elements(REE)and high-field strength elements(HFSE)of the metamorphic olivine are higher than typical mantle olivine.The textural and chemical characteristics of the olivine indicate metamorphic origin as a result of deserpentinization of a serpentinized ultramafic protolith rather than primary assemblage reflecting mantle residues from high-degrees of partial melting.The close association of olivine,antigorite and intergrown Ti-Chn and Ti-Chu suggests pressure condition between$1.3–2.6 GPa within the antigorite stability field(<700°C).The overall petrological and geochemical features of Lens B ultramafic body within the Eoarchean ISB indicate that these are allochthonous ultramafic rocks that recorded serpentine dehydration at relatively lower temperature and reached eclogite facies condition during their complex metamorphic history similar to exhumed UHP ultramafic rocks in modern subduction zone channels.  相似文献   

Ionospheric and geomagnetic disturbances during the 2005 Sumatran earthquakes     

Alina Marie Hasbi  Mohammed Awad Momani  Mohd Alauddin Mohd Ali  Norbahiah Misran  Kazuo Shiokawa  Yuichi Otsuka  Kiyohumi Yumoto 《Journal of Atmospheric and Solar》2009,71(17-18):1992-2005

This paper investigates the ionospheric and geomagnetic responses during the 28 March 2005 and 14 May 2005 Sumatran earthquakes using GPS and magnetometer stations located in the near zone of the epicenters. These events occurred during low solar and geomagnetic activity. TEC oscillations with periods of 5–10 min were observed about 10–24 min after the earthquakes and have horizontal propagation velocities of 922–1259 m/s. Ionospheric disturbances were observed at GPS stations located to the northeast of the epicenters, while no significant disturbances were seen relatively east and south of the epicenters. The magnetic field measurements show rapid fluctuations of 4–5 s shortly after the earthquake, followed by a Pc5 pulsation of 4.8 min about 11 min after the event. The correlation between the ionospheric and geomagnetic responses shows a good agreement in the period and time lag of the peak disturbance arrival, i.e. about 11–13 min after the earthquake.  相似文献   

Seismic response control using electromagnetic inertial mass dampers          下载免费PDF全文

Yutaka Nakamura  Akira Fukukita  Kazuo Tamura  Issei Yamazaki  Taichi Matsuoka  Kazuhiko Hiramoto  Katsuaki Sunakoda 《地震工程与结构动力学》2014,43(4):507-527

This paper presents a new type of electromagnetic damper with rotating inertial mass that has been developed to control the vibrations of structures subjected to earthquakes. The electromagnetic inertial mass damper (EIMD) consists of a ball screw that converts axial oscillation of the rod end into rotational motion of the internal flywheel and an electric generator that is turned by the rotation of the inner rod. The EIMD is able to generate a large inertial force created by the rotating flywheel and a variable damping force developed by the electric generator. Device performance tests of reduced‐scale and full‐scale EIMDs were undertaken to verify the basic characteristics of the damper and the validity of the derived theoretical formulae. Shaking table tests of a three‐story structure with EIMDs and earthquake response analyses of a building with EIMDs were conducted to demonstrate the seismic response control performance of the EIMD. The EIMD is able to reduce story drifts as well as accelerations and surpasses conventional types of dampers in reducing acceleration responses. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Sediment distribution and depositional processes along the fluvial to marine transition zone of the Mekong River delta,Vietnam     

Marcello Gugliotta  Yoshiki Saito  Van Lap Nguyen  Thi Kim Oanh Ta  Toru Tamura 《Sedimentology》2019,66(1):146-164

The area of coastal rivers with a combination of fluvial, tidal and wave processes is defined as the fluvial to marine transition zone and can extend up to several hundreds of kilometres upstream of the river mouth. The aim of this study is to improve the understanding of sediment distribution and depositional processes along the fluvial to marine transition zone using a comprehensive dataset of channel bed sediment samples collected from the Mekong River delta. Six sediment types were identified and were interpreted to reflect the combined action of fluvial and marine processes. Based on sediment‐type associations, the Mekong fluvial to marine transition zone could be subdivided into an upstream tract and a downstream tract; the boundary between these two tracts is identified 80 to 100 km upstream of the river mouth. The upstream tract is characterized by gravelly sand and sand and occasional heterolithic rhythmites, suggesting bed‐load supply and deposition mainly controlled by fluvial processes with subordinate tidal influence. The downstream tract is characterized by heterolithic rhythmites with subordinate sand and mud, suggesting suspended‐load supply and deposition mainly controlled by tidal processes with subordinate fluvial influence. Sediment distributions during wet and dry seasons suggest significant seasonal changes in sediment dynamic and depositional processes along the fluvial to marine transition zone. The upstream tract shows strong fluvial depositional processes with subordinate tidal influence during the wet season and no deposition with weak fluvial and tidal processes during the dry season. The downstream tract shows strong coexisting fluvial and tidal depositional processes during the wet season and strong tidal depositional processes with negligible fluvial influence during the dry season. Turbidity maxima are present along the downstream tract of the fluvial to marine transition zone during both wet and dry seasons and are driven by a combination of fluvial, tidal and wave processes.  相似文献   

The missing half of the subduction factory: shipboard results from the Izu rear arc,IODP Expedition 350     

Cathy J. Busby  Yoshihiko Tamura  Peter Blum  Gilles Guèrin  Graham D. M. Andrews  Abigail K. Barker 《International Geology Review》2017,59(13):1677-1708

IODP Expedition 350 was the first to be drilled in the rear part of the Izu-Bonin, although several sites had been drilled in the arc axis to fore-arc region; the scientific objective was to understand the evolution of the Izu rear arc, by drilling a deep-water volcaniclastic section with a long temporal record (Site U1437). The Izu rear arc is dominated by a series of basaltic to dacitic seamount chains up to ~100-km long roughly perpendicular to the arc front. Dredge samples from these are geochemically distinct from arc front rocks, and drilling was undertaken to understand this arc asymmetry. Site U1437 lies in an ~20-km-wide basin between two rear arc seamount chains, ~90-km west of the arc front, and was drilled to 1804 m below the sea floor (mbsf) with excellent recovery. We expected to drill a volcaniclastic apron, but the section is much more mud-rich than expected (~60%), and the remaining fraction of the section is much finer-grained than predicted from its position within the Izu arc, composed half of ashes/tuffs, and half of lapilli tuffs of fine grain size (clasts <3 cm). Volcanic blocks (>6.4 cm) are only sparsely scattered through the lowermost 25% of the section, and only one igneous unit was encountered, a rhyolite peperite intrusion at ~1390 mbsf. The lowest biostratigaphic datum is at 867 mbsf (~6.5 Ma), the lowest palaeomagnetic datum is at ~1300 mbsf (~9 Ma), and the rhyolite peperite at ~1390 mbsf has yielded a U–Pb zircon concordia intercept age of (13.6 + 1.6/?1.7) Ma. Both arc front and rear arc sources contributed to the fine-grained (distal) tephras of the upper 1320 m, but the coarse-grained (proximal) volcaniclastics in the lowest 25% of the section are geochemically similar to the arc front, suggesting arc asymmetry is not recorded in rocks older than ~13 Ma.  相似文献   

Circumstellar matter in the symbiotic binary CH cyg during its current outburst     

A. Skopal  M. F. Bode  M. Bryce  J. Meaburn  S. Tamura 《Astrophysics and Space Science》1995,224(1-2):559-560

We present optical high-resolution spectroscopy and UBV photometry of the symbiotic binary CH Cyg during the current outburst which began in 1992 February.  相似文献   

Local structure of (Ca, Sr)2 (Mg, Co, Zn) Si2O7 melilite solid-solution with modulated structure     

Takuo Tamura  Akira Yoshiasa  Kazuaki Iishi  Setsuo Takeno  Hironobu Maeda  Shuichi Emura  Kichiro Koto 《Physics and Chemistry of Minerals》1996,23(2):81-88

The local structure around Co, Zn and Sr atoms in incommensurately modulated, melilite-type X₂T¹ T ₂ ² O₇ (X=Ca and Sr, T¹=Mg, Co and Zn, T²=Si) solid-solutions has been investigated by EXAFS analyses. The modulated structure was confirmed in Ca_2-xSr_xCoSi₂O₇ solid-solutions with X=0.0 to 0.6 and for both Ca₂Mg_1-YCo_YSi₂O₇ and Ca₂Mg_1-YZn_YSi₂O₇ solid-solutions over the whole compositional range at room temperature. The actual bond-distances determined by the EXAFS method for the T¹ site (Co-, Zn-O) in the modulated structure are longer than the mean bond-distances obtained from the X-ray diffraction method. This is attributable to the libration of the T¹ tetrahedra. In the Ca_1-XSr_XCoSi₂O₇ solid-solution both the Sr-O and Co-O distances by the EXAFS method for the X-site increase from Ca end-member to Sr end-member. These increases are respectively 0.8% and 0.6%. This means the local expansions of the tetrahedral sheets and of the XO polyhedra are well matched. In the modulated Ca₂Co_1-YMg_YSi₂O₇ and Ca₂Zn_1-YMg_YSi₂O₇ solid-solutions, the actual Co-O and Zn-O distances for the T¹-sites are nearly constant in the whole compositional range. The compositional variations of the local structure around the cations in the solid-solution are different for the X and T¹ sites. It is concluded that the local geometric restriction for the size of substituted cation in X site is larger than that in T¹ site. The dimension of the tetrahedral sheet puts restriction on the size of the cations situated at the interlayer X sites. In other words, the different behavior of the local geometric restriction between the X and T¹ sites is an important feature of the melilite structure and is also related to the modulated structure.  相似文献